Member Login

Weld Australia Magazine – Members survey

In early 2022, the Australian Cobotics Centre conducted a survey of Weld Australia members about their workforce and technology challenges. This feedback is crucial for us to understand how we can support the welding industry as it is a key driver and enabler of advanced manufacturing.
Tasks that Weld Australia members identified as potentially suitable for cobots included grinding, overhead welding, repetitive welding, and manual handling. The key challenge relating to the workforce was seen as labour shortages and skills shortages. A wide range of critical job roles were identified, with welding highlighted as the most critical. Other critical roles included managers, project managers, supervisors, trainers, and staff with knowledge of welding standards and health and safety standards.

For more information, see the June 2022 issue of Australian Welding: Australian Welding – June 2022 – Cobotics Centre V2

SAGE Prize for Innovation/Excellence awarded to Centre’s researchers

Congratulations to our ‘Human-Robot Workforce’ reSAGE Journalssearchers, co-lead Dr Penny Williams and Chief Investigator Prof Paula McDonald on being awarded the SAGE Prize for Innovation and Excellence in the Work, Employment and Society journal.

The prize is awarded annually to one paper in each of the BSA’s prestigious journals: Cultural Sociology, Sociological Research Online, Sociology and Work, Employment and Society and is awarded to the paper published in the previous year’s volume judged to represent innovation or excellence in the field.

Their paper, Means of Control in the Organization of Digitally Intermediated Care Work, can be found here: Means of Control in the Organization of Digitally Intermediated Care Work – Paula McDonald, Penny Williams, Robyn Mayes, 2021 (

2022 Winners

Work, Employment and Society


Cultural Sociology

  • Please watch this space for details.

Sociological Research Online

  • Please watch this space for details.


Australian Network for Art & Technology (ANAT) Residency at ARM Hub and Cobotics Centre

We are pleased to announce that the ARM Hub (and Australian Cobotics Centre) will be hosting Dr Steph Hutchison through an Australian Network for Art & Technology (ANAT) Residency over the second half of 2022.

ANAT’s prestigious flagship program has supported creative research collaborations between more than 100 artists and scientists, since it was established in 2004.

ANAT Synapse involves Australian science organisations hosting artists in residence, leading to profound artistic and professional development for the participants, while also building a sustainable support base for interdisciplinary creative collaboration in Australia.

The Project entitled, Cobotic Improvisations, draws on dance improvisation and choreographic methodologies to research how humans might predict the movement of their robot collaborators. The ARM Hub and the Australian Cobotics Centre have the potential to benefit from the embodied practice methods and viewing human-robot collaboration through a new lens – choreographic, improvisation and embodied practice. The capacity of choreographic and dance improvisational methods enable Steph to quickly prototype and perform different scenarios. And, the sensitivity of the dancer to read the relationships within the environment have the potential to inform interaction and test the thresholds of comfortability of both humans and robots in close collaborative environments. Steph’s work will help the fundamental research in how humans can predict how a robot is about to move, which is a very under investigated issue in robotics.

The project is closely linked to the Centre’s Human-Robot Interaction program.

Meet our E.P.I.C. Researcher, Associate Professor Glenda Caldwell

Associate Professor Glenda Caldwell

The Australian Cobotics Centre has some incredibly E.P.I.C. researchers. Each month we will be profiling a different researcher. Associate Professor Glenda Caldwell, co-Lead of the ‘Designing Socio-Technical Robotics Systems‘ program and the Centre’s Open Innovation Network, is kicking things off.

We sat down with Glenda recently to find out more about why she does what she does.

  • Tell us a bit about yourself and your research with the Centre?

My disciplinary background is in Architecture with a particular interest in computational design and digital fabrication. I have always been fascinated – a little intimidated and inspired – by technology (software and hardware) and its impact on how we make things, how it impacts our design processes, and our ability to visualise and communicate our ideas. The research we are doing in Program 3: Designing Socio-Technical Robotic Systems looks to explore and further understand what and how human centered design methods and processes can facilitate or drive the integration, implementation and adoption of Collaborative Robots into manufacturing tasks of industry partners. We explore the human factors such as ergonomics and motivation, the design factors such as use of space, design of systems and robotic tools, and the virtual factors such as use of VR to simulate and validate cobotic tasks in safe virtual environments. We intend to use design approaches to take the people on the workshop floor on the journey with us of exploring how and why a cobot can improve the manufacturing tasks they are working on. The outcomes we seek will deliver safer working environments that are more productive and efficient while more importantly will also be more enjoyable and stimulating for humans working collaboratively with robots.

  • Why did you decide to be a part of the Australian Cobotics Centre?

I see being a part of the Australian Cobotics Centre as a natural next step and evolution from the completed IMCRC Design Robotics Project where I was a Chief Investigator. There were many research opportunities that arose from that project where we could see the tremendous value for further Cobotics research in manufacturing. The ACC provides opportunities to work with researchers from a range of disciplines and backgrounds from UTS, Swinburne and QUT while collaborating with diverse industry partners who create different types of products using different manufacturing processes and materials. This mixture and breadth of expertise from both the academics and the industry sides is super exciting and essential to collaborate on and address the different challenges and many opportunities for cobotic solutions. This is an ideal test bed for progressing impactful design and cobotic research which is emerging in recognition not only in manufacturing but in other sectors such as construction and for helping to develop the next research superstars who are embarking on their own research and career journeys.

  • What project are you most proud of throughout your career and why?

During my PhD I was able to secure internal seed funding for a project called the InstaBooth, a purpose designed and built pop-up interactive booth for community engagement. Its purpose was to include and capture the voices of people from public places and assist in their communication and envisioning of the city they wanted to live in.  This tiny, but quick to grow large, project was highly collaborative with colleagues from across disciplines, with other PhD students, undergraduate students, other universities including California Polytechnic University and University of Sydney, and numerous community partners. The project was creative, collaborative, and so much fun while also highly impactful not only for the researchers and students involved but also for the community members who participated and engaged with it. I am most proud of this project.

  • What do you hope the long-term impact of your work will be?

My ambition and long -term impact of my work will not only be for the successful design of the integration of cobots into our industry partners’ manufacturing lines but also more broadly to the manufacturing and construction industry demonstrating that human centered design is essential in creating workspaces, places, and processes that respond to the needs of humans while being safe, efficient, and sustainable. I am driven by openness, collaboration and creativity for innovative outcomes and hope that these key ingredients will help to create environments that support gender equity in research and climate responsible processes and solutions.

  • Aside from your research, what topic could you give an hour-long presentation on with little to no preparation?

I could talk about teaching in Architecture or Research Methods. I could talk broadly about Computational Architecture and Design Robotics. My other research topics – Media Architecture (can put together quickly) or Human Building Interaction (would need time to put this together though) is something I could also talk about. I could also talk about being an academic and a mum, and the juggle of work life balance : )

Glenda also works with the QUT Design Lab. Read more about one of Glenda’s recent projects which was a collaboration between QUT,  Griffith University, The University of Melbourne, La Trobe University, and Monash University: Transforming Aged Care with Virtual Reality.

17th International DESIGN Festival paper published

A Life-Cycle Framework to Manage Collaboration and Knowledge Exchange in Open Organisation


We are very proud to announce the Centre’s first official publication authored by the Centre’s Open Innovation Team – Dr Matthias Guertler, former CI Prof Nico Adams, A/Prof Glenda Caldwell and A/Prof Jared Donovan.

The paper was accepted as part of the International DESIGN Conference held from 23-26th May. The paper presents and evaluates the first part of a framework to manage successful collaboration and knowledge exchange across the entire life cycle an Open Organisation (OO).


You can read the full paper here: Design Conference Paper Template (

Changes to our Swinburne Chief Investigators

We are sad to announce the departure of two of our Program co-Leads from Swinburne University of Technology.

  • Professor XiaoQi Chen is moving to South China University of Technology where he will be the new Dean of the School of Intelligent Engineering.
  • Professor Sally McArthur is moving to Deakin University where she will be Director of the Institute for Frontier Materials (IFM).

Thank you XiaoQi and Sally for your input and support in shaping the Centre so far. We wish you the best in your new roles.

In their places, we welcome Dr Michelle DunnDr John McCormick and Assoc Prof Chris McCarthy to the Australian Cobotics Centre.

Dr Michelle Dunn will take over the co-leadership of program 4 with Dr Lee Clemon from UTS and Assoc Prof Mats Isaksson will become co-lead of Program 1 with Prof Teresa Vidal-Calleja from UTS.